Skip to content
Hardware

Custom UPS & Off-Grid Solar: 12V LiFePO4 Battery Pack with Zero-Jitter Relay

Field notes on assembling a custom 4S 12.8V LiFePO4 battery pack, BMS active balancing, and building an ultra-fast MOSFET transfer switch for home servers.

Remix into Workplace Studio:

What Was I Trying to Do?

Frequent power cuts and voltage fluctuations in Bangladesh can corrupt file systems on home Linux servers, NAS boxes, and optical network terminals (ONT). Off-the-shelf lead-acid commercial offline UPS units suffer from heavy battery degradation within 12 to 18 months, slow relay switching (10-15ms) that causes router reboots, and inefficient DC-AC-DC inversion losses.

I built a dedicated DC-to-DC Off-Grid Solar and LiFePO4 UPS to power my network equipment and home server continuously with zero AC inverter losses.

The Hardware Assembly

  1. Cell Selection & Configuration:
    • 4S configuration using Grade-A 3.2V 30Ah Lithium Iron Phosphate (LiFePO4) prismatic cells, yielding a nominal 12.8V and 384Wh capacity.
  2. Battery Management System (BMS):
    • Installed a 4S 30A Smart BMS featuring low-temperature charging cutoff and active cell balancing (30mV cell delta threshold).
  3. Dual-MOSFET Transfer Switch:
    • Replaced mechanical electromagnetic relays with dual P-channel power MOSFETs operating as an ideal diode OR-gate.
    • Switching transition from mains DC power adapter to LiFePO4 battery occurs in under 2.5 microseconds, completely imperceptible to sensitive router capacitors.
  4. Step-Down Buck Regulators:
    • Synchronous buck converters step down 12.8V to clean, noise-filtered 5V and 9V rails for microcontrollers and auxiliary fans.

Key Highlights & Performance

  • Zero Inversion Loss: Direct DC-to-DC powering delivers 91% overall system efficiency, compared to ~60% on traditional lead-acid inverter UPS units.
  • Continuous Runtime: Delivers 8.5 hours of continuous runtime for a multi-device setup (MikroTik router + ONU + mini-PC server pulling ~28W total).
  • Longevity: LiFePO4 chemistry provides 3,000+ full cycles (equivalent to 7 to 10 years of daily usage).

What I Learned

Never omit cell pre-balancing before putting a series pack together. Connecting cells in parallel at 3.65V for 24 hours to top-balance them ensured the pack delivered full rated capacity without premature single-cell undervoltage cutoffs.

LiFePO4SolarHardwareBMSUPS
Md Sabbirul Islam Khan

Md Sabbirul Islam Khan

Written by THE SABBiR